Product overview

Product selector

The Ride-On Tyre Protection System (“Ride-On TPS”) is a revolutionary line of tyre sealants formulated to prevent flats caused by punctures from nails, thorns, screws and other debris. Ride-On TPS tyre sealants extend tyre life by hydrodynamically balancing tyre/wheel assemblies, lowering tyre operating temperatures and helping tyres maintain their correct pressures. Vehicles with Ride-On TPS benefit from better handling, better fuel economy, lower CO2 emissions, longer lasting tyres and a safer ride. Ride-On TPS tyre sealants also help to reduce the expense and aggravation of flat tyres and premature tyre failures. Ride-On TPS comes in several formulations for use in both high-speed, on-road as well as slow-moving, off-road applications.

Throughout the world, commercial carriers, waste haulers, truck leasing companies, governments, bus companies, farmers, public utilities, building contractors, TIR fleets, equipment rental companies, motorcyclists and many others – owners and operators of all manner of vehicles and fleets – are saving time and money by using Ride-On TPS tyre sealants.

Ride-On TPS has more than 250,000 applications and over five billion miles to attest to its effectiveness. It is currently used by the military, US Postal Service, more than sixty cities, municipalities, government agencies, in more than 4,000 police vehicles, and in thousands of tractors and trailers. More than 25 percent of the USA's top twenty hauling and disposal fleets are now using Ride-On TPS tyre sealants to help them with their pressure maintenance programs and as a means of reducing their vehicle downtime. Ride-On is available as an OEM item by the USA's largest trailer manufacturers and through six of the fifteen largest commercial tyre dealers. Ride-On TPS is available in formulations for every tyre application.

Whether for over-the-road or off-road use, in brand-new tyres or retreads, tyres that are on vehicles or in your ready rack, we have a solution that will work for you and your fleet. You'll discover that Ride-On TPS tyre sealants pay for themselves many times over!

Browse our products to see which formulation of Ride-On TPS ir right for your application and type of vehicles.

Ride-On Commercial High Speed™ Formula (CHS™)

We Don't Make Tyres... We Just Make Them Run Better!™

Commercial High Speed™ sealant (CHS™) is a revolutionary gel that helps balance tyres and turn them into self-sealing tyres, when punctured, using fibers that are six times stronger than steel. CHS™ helps tyres maintain their pressure up to 500% better than untreated tyres. Properly inflated tyres that are balanced run cooler last longer and lower your CO2 emissions footprint. The CHS™ sealant is designed for use in cars, commercial vehicles, tractors, trailers, caravans, buses in fact any vehicle that travels in excess of 30mph.

1. Improves fuel economy - Under inflated tyres have higher rolling resistance which will result in a loss of fuel economy.
2. Lowers your CO2 footprint - Improving your fuel economy lowers your CO2 emissions output and will help save the environment.
3. Seals Punctures - Prevents flats and seals multiplepunctures up to 1/4" in diameter. helps seal slow leaks that cause tyres to deflale over time.
4. Extends tyre life - CHS helps balance tyres and helps tyres run cooler by eliminating the porosity leaks that lead to under inflated tyres.
5. Will not harm tyres and wheels - CHS™ conditions casings and contains corrosion inhibitors to protect steel, aluminum, and yellow metals from oxidation.
6. Water dispersible - Washes out with plain water leaving no residue. Ride-On CHS™ will not interfere with retreading, mask NTD machines, cause chamber fires, or prevent the application of section, tyre plug and patch repairs.
7. Safe to use - Non-flammable, non-hazardous, biodegradable.
8. Suitable for all weather conditions - Specially formulated to prevent freezing at extremely low temperatures (-40 °F) and separation at high temperatures.
9. Available in convenient 5-gallon pails and 55-gallon drums.

A Reputation You Can Ride-On

Inovex Industries, Inc. has earned its reputation by providing the world’s most advanced tyre sealing solutions to commercial and professional fleets. Ride-On™ TPS is currently used in more than 250,000 applications by municipalities, counties, government agencies and hundreds of commercial fleets around the world.

Ride-On™ TPS is available in formulations for every tyre application. Try our Heavy Duty Off Road (HDOTR)™ formula for off road equipment traveling at speeds less than 30 mph. Ride-On™ TPS is also available for motorcycles and bicycles.

Reduce Tyre Expenses Up To 25% Or More - GUARANTEED!

Face it. Whether you manage ten vehicles or ten thousand, tyre expenses are a huge part of your budget. Now you can reduce those expenses up to 25% or more using Ride-On TPS.

Ride-On TPS is a revolutionary sealant that makes any tyre into a self-sealing tyre. While you drive, the gel-like sealant evenly coats the inner surface of your tyre. The coating helps eliminate chronic air leaks, balances the tyre, reduces the operating temperature of the tyre, reduces your CO2 emissions footprint and instantly seals punctures up to 1/4" in diameter using fibers that are six times stronger than steel. One application of Ride-On will last for the life of your tyres. The result: your tyre expenses are dramatically reduced using Ride-On.

It's as Easy as A, B, C, D,E

A Air Pressure
Ride-On TPS helps eliminate porosity leaks that cause tyres to naturally deflate over time. Properly inflated tyres run cooler, last longer, use less fuel and reduces your CO2 emissions footprint. Independent fleet tests have proven that tyres containing Ride-On maintain their set point pressures up to 500% better than untreated tyres.

B Balance Tyres
Ride-On TPS Commercial High Speed (CHS) sealant helps hydrodynamically balance medium to heavy truck tyres. Ride-On outperforms traditional lead weights that tend to fall off. Once Ride-On is installed in a tyre, it will dynamically act to dampen vibrations for the life of the tyre so you do not need periodic rebalancing. And Ride-On won't clump up or clog valve stems like powder balancers will.

C Cooler Tyres
Tyres that are properly inflated and balanced run cooler and last longer. Less flexing, bounce and fatigue means cooler tyres and enhanced casing life - up to 25% or more!

D Decrease Downtime
Ride-On TPS makes any tyre into a self-sealing tyre. By eliminating 85-95% of flat tyres due to punctures in the crown of a tyre, we can keep your fleet running, reduce costly road service calls, and eliminate run-flats.

E Environment

By maintaining the correct tyre pressure 500% better than an un-treated tyre Ride-On TPS will reduce the amount of fuel you use, which in turn reduces your CO2 emissions footprint.

Download Commercial High Speed™ Formula (CHS™) Brochure

Tyre Conditioner & Sealant™ Formula (TC&S™)

Tyre Conditioner & Sealant™ Formula (TC&S™) is a specially formulated industrial-grade tyre sealant that protects tyres and rims of vehicles operating at speeds less than 30 mph. TC&S,™ a preventive maintenance product, is designed to reduce downtime by sealing punctures, condition casings, and help to reduce rim corrosion and scale buildup in industrial, off-road and agricultural tyres. Additionally, TC&S™ extends tyre life by reducing porosity air loss, a major cause of underinflation and heat buildup in tyres.

1. Reduces downtime and extends tyre life - Prevents flats, seals punctures up to 1/4" in diameter, slow leaks, vent holes, bead seats and o-ring leaks.
2. Will not harm tyres and wheels - TC&S™ conditions casings and contains corrosion inhibitors that help reduce scale and corrosion buildup.
3. Water dispersible - Washes out with plain water leaving no residue. Ride-On TC&S™ will not interfere with the application of boots, section or tyre plug and patch repairs.
4. Safe to use - Non-flammable, non-hazardous, biodegradable.
5. Lowers labor costs - TC&S™ helps with mounting and de-mounting of off-road, industrial, and agricultural tyres. High heat can cause a tyre to weld itself to a rim, resulting in hours of labor spent trying to break free the tyre bead and ultimately resulting in damage to the tyre and rim.
6. Suitable for all weather conditions - Specially formulated to prevent freezing and separation at high temperatures.
7. Available in convenient 6-gallon pails and 55-gallon drums.

A Reputation You Can Ride-On

Inovex Industries, Inc. has earned its reputation by providing the world’s most advanced tyre sealing solutions to commercial and professional fleets. Ride-On TPS is currently used in more than 250,000 applications by municipalities, counties, government agencies and hundreds of commercial fleets.

Ride-On TPS is available in formulations for every tyre application. Try our Commercial High Speed (CHS) formula for over-the road equipment traveling at speeds in excess of 30 mph. For more severe applications and extreme off-road conditions, where downtime is critical, we recommend the use of our Ride-On Heavy Duty Off-Road (HDOTR) sealant. Ride-On TPS is also available for motorcycles and bicycles.

Download Brochure

Ride-On HDOTR™ Formula Heavy Duty Off-Road™

Extreme Protection When Downtime is NOT an Option!

Heavy Duty Off-Road™ sealant (HDOTR™) is designed for off-the-road vehicles that require extra protection in extreme operating conditions. The HDOTR™ sealant was designed for use by the military, landfills, quarries, construction companies, or any critical vehicle that travels less than 30 mph. The HDOTR™ formula offers maximum protection against punctures from objects up to 1/2" in diameter. The HDOTR™ sealant conditions casings, and extends tyre life by helping tyres run cooler.

1. Reduces downtime and extends tyre life - Prevents flats, seals multiple punctures up to 1/2" in diameter, slow leaks, vent holes, bead seats and o-ring leaks.
2. Will not harm tyres and wheels - HDOTR™ conditions casings and contains corrosion inhibitors that help reduce scale and corrosion buildup.
3. Safe to use - Non-flammable, non-hazardous, biodegradable.
4. Water dispersible - Washes out with plain water leaving no residue. Ride-On HDOTR™ will not interfere with the application of boots, section or tyre plug and patch repairs.
5. Lowers labor costs - HDOTR™ helps with mounting and de-mounting of off-road, industrial, and agricultural tyres. High heat can cause a tyre to weld itself to a rim, resulting in hours of labor spent trying to break free the tyre bead and ultimately resulting in damage to the tyre and rim.
6. Suitable for all weather conditions - Specially formulated to prevent freezing at extremely low temperatures (-40 °F) and separation at high temperatures.
7. Available in convenient 5-gallon pails and 55-gallon drums.

A Reputation You Can Ride-On

Inovex Industries, Inc. has earned its reputation by providing the world’s most advanced tyre sealing solutions to commercial and professional fleets. Ride-On™ TPS is currently used in more than 250,000 applications by municipalities, counties, government agencies and hundreds of commercial fleets.

Ride-On™ TPS is available in formulations for every tyre application. Try our Commercial High Speed (CHS)™ sealant for vehicles traveling at speeds in excess of 30 mph.Ride-On™ TPS is also available for motorcycles and bicycles.

DownloadBrochure

Ride-On™ Tyre Conditioner & Ballast™ Formula (TC&B™)

Ride-On™ Tyre Conditioner & Ballast™ Formula (TC&B™) is a specially formulated ballast and cooling solution that protects tyres and rims of agricultural, industrial, mining, and construction equipment. Ride-On™ TC&B™ is a great alternative to traditional ballast liquids that are environmentally hazardous, corrosive and harmful to tyres and wheels. Additionally, Ride-On™ TC&B™ extends tyre life by lubricating tyre innerliners, helping tyres run cooler, and reducing underinflation due to air loss from o-rings, vent holes, bead seats, and tyre oxidation. Ride-On™ TC&B™ is not a puncture sealant and contains no fillers.

1. Reduces rim replacement and reconditioning costs - Ride-On™ TC&B™ conditions casings and contains corrosion inhibitors that help reduce rim scale and corrosion buildup. Ride-On™ TC&B™ lowers operating and maintenance costs by reducing the need for rim and bead cleanup and reconditioning.
2. Water dispersible - Washes out with plain water leaving no residue. Ride-On™ TC&B™ will not interfere with the application of boots, section or tyre plug and patch repairs.
3. Safe to use - Non-flammable, non-hazardous, biodegradable.
4. Lowers labor costs - Ride-On™ TC&B™ helps with mounting and de-mounting of off-road, industrial, and agricultural tyres. High heat can cause a tyre to weld itself to a rim, resulting in hours of labor spent trying to break free the tyre bead and ultimately resulting in damage to the tyre and rim.
5. Suitable for all weather conditions - Specially formulated to prevent freezing at low temperatures and separation at high temperatures. Ride-On™ TC&B™ is an effective alternative to traditional ballast liquids (Density: 8.5 to 8.8 lbs/gal).
6. Available in convenient 6-gallon pails and 55-gallon drums.

A Reputation You Can Ride-On

Inovex Industries, Inc. has earned its reputation by providing the world’s most advanced tyre sealing solutions to commercial and professional fleets. Ride-On™ TPS is currently used in more than 250,000 applications by municipalities, counties, government agencies and hundreds of commercial fleets.

Ride-On™ TPS is available in formulations for every tyre application. Try our Commercial High Speed (CHS)™ formula for over-the road equipment traveling at speeds in excess of 30 mph. For more severe applications and extreme off-road conditions, where downtime is critical, we recommend the use of our Ride-On Heavy Duty Off-Road (HDOTR)™ sealant or our Tyre Conditioner & Sealant (TC&S)™ industrial sealant. Ride-On™ TPS is also available for motorcycles and bicycles.

Download Brochure

Ride-On Tyre Protection System (TPS) Motorcycle Formula

Stop Flat Tyres Before They Stop You As tested in Rider Magazine USA. They put 9 holes in their tyres ..... and kept on riding!

“Unlike aerosol roadside repairs and even slime, the popular sealant favored by bicyclists and off-road riders, Ride-On’s chemicals do not adversely affect aluminum rims. This is worth considering. Over 5,000 miles and a variety of driving conditions, I found no discernible effect – positive or negative – upon wheel balance or any other area of performance .... just a giant gain in a tyre’s ability to hold air in the presence of sharp metal objects.” Larry Grodsky, Contributing Editor – Rider Magazine

Not Another Tyre Sealant...

Tyre sealants are old business – they have been on the market for more than 50 years. Although many of the sealants available on the market do a decent job of sealing punctures, they can occasionally create more problems than they solve. Some tyre sealants have been known to cause corrosion, balancing problems, and damage to the inner liners of tyres. Many sealants also leave residues that are difficult to clean out, and thus prevent patches and plugs from properly adhering to tyres.

Inovex Industries, Inc. has earned its reputation by providing the most advanced tyre sealing solutions to commercial and professional fleets. Ride-On TPS is currently used by more than 60 municipalities, cities, counties, and government agencies and more than 350 commercial firms located in over 39 states and 9 countries. Ride-On TPS is also used in more than 4,000 police vehicles and motorcycles. These fleets have purchased and depend on the Ride-On TPS products to protect their fleet and ensure that their vehicle downtime is kept at a minimum.

How does Ride-On work?

While you ride, a protective layer of Ride-On TPS - a tyre sealant containing fibers six times stronger than steel - evenly coats the inner surface of your tyre. If your tyre is punctured the internal air pressure forces Ride-On into the hole, sealing it virtually instantly.

With Ride-On TPS tyre sealant, your tyre literally fixes itself! And since it stops slow leaks the moment they start, your tyres always stay properly inflated. Your tyres last longer, your bike handles better, your fuel economy improves, you lower your CO2 emissions footprint and you ride more safely.

Ride-On is designed to seal punctures from objects up to 1/8” in diameter in the tread area of your tyre. Due to a tyre’s inner curvature, Ride-On will not seal sidewall damage, or damage near the shoulder of the tyre (the outside 1-1.5” of the tyre tread). If a tyre has a cut, impact break, bruise, bulge, snag, or sidewall damage, take the tyre out of service and have it inspected by a professional tyre specialist.

Great for Sport Bikes, Touring, Cruisers, Motocross, Trikes, Sidecars, Trailers, & ATVs

Works in Tubes and Tubeless Tyres

Ride-On TPS will eliminate 95% of your flats in tubeless tyres from objects up to 1/4" (1/8” for tube tyres) that penetrate the contact area of your tyre. Ride-On’s efficiency in tube tyres is reduced to 65% since puncturing objects often tear the tube. It is impossible for a tyre sealant to seal a tear. It is vital to remove the puncturing object immediately from a tyre containing a tube to prevent further damage that can result in tearing the tube.

Examples of tyres punctured in areas of marginal Ride-On TPS coverage:

Repair vs Replacement

Our company takes the position that any repair in a motorcycle tyre should be treated as a temporary repair. We recommend that as soon as possible after finding an object in your tyre, you have the tyre inspected by a professional. If the recommendation is for fixing the puncture or replacing the tyre, then you should do so. Ride-On will not interfere with the application of conventional tyre plug and patch repairs, and can easily be washed out of tyres with water.

What Should You Do if You Find a Nail or a Screw in Your Tyre?

Inspect your tyres regularly for perforating objects or other damage. Look for and remove any stones, bits of glass, metal, or other foreign objects wedged in the tread – these may work their way deeper into the tyre and eventually cause a puncture. Also check your tyres closely for signs of uneven wear patterns. Uneven wear may be caused by improper inflation, misalignment, tyre imbalance, or damaged suspension parts. If the cause of the uneven wear is not corrected, further tyre damage will occur. Certain uneven wear patterns may also indicate that the tyre has suffered internal or structural damage; such damage requires immediate attention from a professional tyre specialist.

If you notice that an object has punctured your tyre tread, drive your bike for 3-5 miles to warm up the tyres. Remove the puncturing object and immediately drive your motorcycle for 2-3 miles, so that Ride-On can work its way into and seal the puncture. Although Ride-On is effective from -40°F to 250°F, please note that it works best once your tyres have warmed up. For maximum safety, have a tyre professional inspect (and if necessary, repair or replace) your tyre as soon as possible after a puncture. Ride-On will not interfere with the application of conventional tyre plug and patch repairs, and can easily be washed out of tyres with water.

You may be wondering why you need to remove puncturing objects from your tyre tread, given that Ride-On forms an effective seal around such objects. The reason is that if an object is left in the tyre, it will shift as the tyre rotates, eventually creating a larger hole and causing further damage to the tyre or tube. Please note that if an object has been in the tyre for a long time, it may take some time for the puncture cavity to close. (This is because rubber has “memory,” which causes it to conform to the shape of the puncturing object.) In this case, the tyre may temporarily lose some air until it is sealed. Note also that if the puncturing object is a screw, you must unscrew it - yanking or pulling the screw will tear the rubber and possibly the steel belts.

Balancing and Ride and Stability Issues

The product manufactured by our leading competitor was originally designed for use in bicycle tyres, and according to their website is “Warning: For high speed application (over65mph / 100kph) use only as a repair (exception trailer tyres). May cause excessive vibration when installed in front tyres or all four tyres". Ride-On is designed to actually help hydrodynamically balance tyres at highway speeds. Once installed in a tyre, it will actually act to dampen vibrations for the life of a tyre so you do not need periodic rebalancing. Although we don’t condone speeding, our dealers and customers comment that their bikes actually run smoother at speeds as high as 150 mph. Ride-On should be installed in tyres and wheels that have been professionally mounted and balanced. Once installed, you should not try to rebalance a tyre containing Ride-On – just let it do what it is was formulated to do!

Will Ride-On Harm My Wheels or Tyres?

Ride-On is designed to be non-hazardous and non-flammable, and contains corrosion inhibitors that protect all alloys of steel, aluminum, magnesium, and yellow metals against oxidation. Although some of our competitors’ products have been documented as causing corrosion, Ride-On enjoys a reputation for being completely compatible with all types of wheels and tyres. Ride-On is currently sold by six of the nation’s ten largest commercial tyre dealers. They install our products into the tyres of their commercial customers, who demand that the products not harm their aluminum or steel wheels. As their tyres can last upwards of 250,000 miles, the fact that Ride-On is designed to not harm tyre ply materials or cause loss of adhesion strength helps those customers retain tyres for the fullest life possible. Letters from manufacturers such as Michelin, Goodyear, Bridgestone/Firestone, Continental, Yokohama, and Toyo that indicate that the use of our products do not automatically void their warranties also bears witness to our success in creating a product that does not cause harm to tyres or wheels.

Download Brochure

Ride-On Tyre Protection System (TPS) Passenger & Light Truck (PLT) Formula

Ride-On Tyre Protection System (TPS) Passenger & Light Truck (PLT) tyre sealant formula is designed for use in cars and light trucks operating at speeds in excess of 30 miles per hour (50 km/h). The PLT formula will seal punctures in tubeless tyres from perforating objects up to 1/8" in diameter that enter the tread area of the tyre.

The PLT formula should be used for light trucks and cars that are expected to travel at highway speeds and where tyre balance is of concern. Ride-On TPS PLT formula is the only product that has been independently tested by the world's leading DOT approved tyre testing facility to not affect tyre balance when tested on a dynamic tyre balancer. Ride-On TPS PLT formula is the only tyre sealant in the world that allows a tyre that it has been installed in to be re-balanced if necessary on a dynamic tyre balancer. NO OTHER SEALANT CAN MAKE THAT CLAIM!

Order the Ride-On TPS PLT formula for your cars, trucks or SUVs.

PLT Kit for small to medium cars. The regular car kit contains everything you need for most small to medium cars.

SUV Kit for large cars, trucks & SUVs. The SUV kit contains enough product to treat most large cars, trucks, and SUV tyres.

Harry Farkhan, EVP of Engineering - Inovex Industries, Inc. at Shelby American Factory

“ Shelby American has been performing ride and handling testing over the past several months. I am pleased to say that Ride-On will be offered to the owners for use in their Series 1's with the backing and confidence of Shelby . Thank you for all your efforts to make this happen. ” Mark Visconti, Vice President Engineering - Shelby American, Inc.

Ride-On Tyre Protection System (TPS) Bike-On™ Formula

Ride-On Tyre Protection System (TPS) Bike-On™ sealant is designed to provide superior protection for your bicycle tyres and helps eliminated the inconvenient flat tyre that you might get on remote trails, during weekend rides, or on your daily commutes.

Use Bike-On™ TPS in your children's bikes, and reduce the worries of what might happen to your loved ones should they get a flat tyre. Professional inner-city courier services and delivery companies rely on Bike-On™ for Bikes to eliminate flat tyres and make sure that their deliveries make it to their destination on time.

The Bike-On™ sealant is designed to work in tube and tubeless bicycle tyres (not for use with presta valves) to seal punctures from objects up to 1/8" (3.18 mm) in diameter. Bike-On helps prevent flats and helps tyres last longer.

As with all Ride-On TPS sealants, the Bike-On™ sealant contains corrosion inhibitors that protect steel and aluminum wheels and tyre belts against rust. Bike-On™ TPS works on all makes, types and sizes of tyres. Bike-On™ TPS has been designed to operate for the legal life of a tyre and one application is all that is needed.

Bike-On™ TPS is manufactured in the US and is completely safe to use. It is not explosive or flammable, and contains no carcinogens or ozone depleting chemicals.